PDA

View Full Version : Building techniques


  1. Soldering SMT components
  2. Winding toroids
  3. Soldering through hole components
  4. Unpacking the SMT components
  5. What temperature is good to solder at on my weller
  6. No way I am getting 39 turns on the toroid
  7. Which Flux to use?
  8. What gauge is the torroid wire?
  9. Which direction to wind the Toroid?
  10. solder type issues
  11. Extra care needed with smd caps?
  12. Chip removal
  13. Articles on SMT building
  14. Capicitor mounting-with gap or not?
  15. This looks like a good SMD soldering tool
  16. What kind of (tin) solder do you use
  17. FM radio distortion
  18. Which power to solder ?
  19. Cooling the chips
  20. Ready wound toroids
  21. Inductors: Litz or Solid Core?
  22. Hi pitched noise on AMP2 : solved !
  23. how to read diodes direction?
  24. Inductors: Winding Techniques
  25. Toroid Winding Calculator
  26. Chip soldering
  27. broke the toroid winding wire on amp6
  28. minimizing hiss on amp 6
  29. testing stage of amp6 build
  30. amp32, tripath chip lead problem
  31. Twisting Input Wires
  32. identifying caps
  33. Are cheap ebay rework stations worth it?
  34. Soldering for the beginner
  35. Putting the Tripath 2022 in a IC socket
  36. 41Hz Kits get a bad rap.
  37. Cleaning holes for remounting components
  38. Transformer Wiring Diagrams
  39. PCB terminals - side stacking (interlocking)
  40. Hot air rework station
  41. How to Guide - Extreme Surface Mount Soldering
  42. Inrush current limiting using an NTC
  43. Cleaning solder iron tips
  44. Very nice surface mount soldering video
  45. Correcting Bad Soldering
  46. Desoldering components with 3+ pins
  47. Total Noob Needs An Iron
  48. Advice on Solder, Desolder Wick
  49. Just a little something: Helperdeck
  50. Nonpolar caps as bulks
  51. I need advice for soldering, solder is beading off
  52. OKI PS-900 / Metcal solder station review
  53. Helperdeck build-assist program
  54. which one to buy
  55. Board testing cigar box
  56. Toroid winding tool.
  57. Request: Amp Board Scans
  58. Soldering SMT, can you do it?
  59. Choosing the right resistor for an LED
  60. Warning, testing an amp with external FETs, without an IC
  61. Farnell has taken up on Chikquik sales!
  62. Power plug for 12V
  63. How to Trace a Short.
  64. Wire stuff like Nasa Does!
  65. Quick and dirty custom enclosure