daan
03-Jul-06, 21:56
Hello,
I've got a problem with the DC voltages: the leads of C99 show a voltage of 21.4 V, but the pads of C1819 show a voltage of 18.2 V instead of the 14.6 I was expecting (R102 = 68ohm).
Can this possibly be explained by a broken voltage regulator? As I'm fairly new in soldering, it is very well possible that I overheated the regulator. Getting a new one is no problem, but before I do that, I would like to know if there's any chance that a new regulator would help...
Thanks!
I've got a problem with the DC voltages: the leads of C99 show a voltage of 21.4 V, but the pads of C1819 show a voltage of 18.2 V instead of the 14.6 I was expecting (R102 = 68ohm).
Can this possibly be explained by a broken voltage regulator? As I'm fairly new in soldering, it is very well possible that I overheated the regulator. Getting a new one is no problem, but before I do that, I would like to know if there's any chance that a new regulator would help...
Thanks!