Jan
31-Aug-06, 18:20
<img src=http://www.41hz.com/images/41hz/AMP11/amp11_4.jpg>
- Top left: two stage very quiet +5V
- Center left: input and statur LED outputs
- Center left: C200 input capacitor
- Center left: Tripath TC2000 processor chip
- Center: Close-up supply capacitors, ultra low ESR 1800 uF, 35V
On request they can be replaced by 1000 uF 50V of the same can size.
- Center top and bottom: power connections
- Right: Output filter toroids and capacitors
- Right center: speaker connection.
The power output chip is on the bottom of the PCB, AMP3 style, just under the close-up bulk capacitors.
Note the big space on the left for your favorite input cap (C200). It can be any hole size between 2.5 and 22.5 mm and it can be 10 mm thick.
- Top left: two stage very quiet +5V
- Center left: input and statur LED outputs
- Center left: C200 input capacitor
- Center left: Tripath TC2000 processor chip
- Center: Close-up supply capacitors, ultra low ESR 1800 uF, 35V
On request they can be replaced by 1000 uF 50V of the same can size.
- Center top and bottom: power connections
- Right: Output filter toroids and capacitors
- Right center: speaker connection.
The power output chip is on the bottom of the PCB, AMP3 style, just under the close-up bulk capacitors.
Note the big space on the left for your favorite input cap (C200). It can be any hole size between 2.5 and 22.5 mm and it can be 10 mm thick.