Customer projects

Another featured project by one of our customers; Rhys Evans from New Zealand.




"The ultimate portable boombox. An awesome mix of 12mm plywood, the 41Hz AMP-6-BASIC, two Tang Band W4 full rangers, a 12V 2.9Ah SLA battery, 3 stage SLA charger, and a black piano gloss finish." Rhys ...

Starting an AMP-7 build.
Vincent has built most of the 41Hz audio amps and here is one of his latest, based on AMP-7.
...

Box before assembling the thing.
...

Well I finished assembling my AMP-6-PS tonight and it power right up with no problems :-D
I tested it with some cheap ...

Hi,
I am starting to build my BoomBox and thought I'd show you how.

I am building on the AMP-6-basic. ...

Greetings everyone, I made this.
The victims.


Torture testing.


Confinement. ...

Megamini the active little beast

I have designed and built a very small active speaker using the same technology as my Macaroni, but this time with AMP11.

It is housed in an aluminum die-cast enclosure, the connections in the back are enclosed in another die-cast enclosure so to make sure that not only dust, dirt or water can't enter the amp/speaker assembly, the speaker is also well sealed off. Normally the connections are as leak as ...