the first step in the amp 6b build calls for 6 .1 uf capacitor there are only 5 supplied is this available at radio shack. i want to finish the amp this week.
the first step in the amp 6b build calls for 6 .1 uf capacitor there are only 5 supplied is this available at radio shack. i want to finish the amp this week.
I'm sure they have it, it's THE most common value...
------X-max. can be several meters on any driver, too bad it can be done only once...------
the .1 uf capacitor from radio shack is 3 times the size of the caps supplied with the kit will it work ok ?
I usually replace them with SMD version, they fit right on the pads...
But the difference in size is probably due to either higher voltage rating or being from the stone age...Neither should make much difference, these caps are not very critical...although it is critical to keep the leads very short and a larger package may compromise this...
------X-max. can be several meters on any driver, too bad it can be done only once...------
i found the missing cap it is in the last bag that contains the new parts.