Does anybody know how R52 and R54 should be populated.
In the descripted R52 is 20K and R54 is not mentioned, but I have here two 200K left over, what to do with them????
Member++
R52 and R54/additional components confusion
Does anybody know how R52 and R54 should be populated.
In the descripted R52 is 20K and R54 is not mentioned, but I have here two 200K left over, what to do with them????
Member++
support did respond fast:" The 200 K are for R52 and R54. These two set the over/under voltage limits. Tripath did not use them in the reference design, only a lower value for R52, leaving R54 balnk. This in practise disabled volage sensing, or actually tied it to the 5V only. With the two 200K (or 220K) The voltage limits will be between 17-18 bolts lower and 32-33V upper. "
Posting Permissions
Reply With Quote